所有产品>>汽车热管理>>10031
最后更新: 2023-01-11 15:58:47
1.png
#10031

H型热力膨胀阀

QRFWH

汽车空调
相关资料下载

1、适用冷媒Apply cold media:HFC-134a/HFC-1234yf;

2、使用油Apply oil:PAG/POE;

3、使用环境温度Applicable ambient temperature:-30120

4、动作方式Mode of action:根据感温部温度和低压侧压力来控制冷媒流量;The refrigerant flow is controlled according to the temperature of the temperature sensing part and the pressure at the low pressure side

5、调节机构adjusting mechanism:通过阀体内部的调节螺丝来进行调整,按顺时针方向调整,则过热度增大,逆时针方向调整则减小;Adjust it by the adjusting screw inside the valve body, the superheat will increase if it is adjusted clockwise, and it will decrease if it is adjusted anticlockwise.

6、充注方式Filling mode:按客户要求;According to customer requirements

7、接头尺寸Joint size:按客户要求;According to customer requirements

8、连接方式Connection mode:按客户要求;According to customer requirements

9、平衡方式Balance mode:按客户要求;According to customer requirements

10、静止过热度设定Static superheat setting:按客户要求;According customer 

requirements

11、安装部位Installation position:蒸发器组件的内部;Inside of evaporator assembly

12、安装状态Installation status:不应朝下安装,允许从下朝上横向旋转90°

It should not be installed downward. It is allowed to rotate 90 ° horizontally from bottom to top.